Vehicle Damage Warnings

CAUTION:
^ When installing urethane installed glass parts, the vehicle must not be driven until the urethane has cured. At temperatures above 21°C (70°F) and relative humidity above 50%, adequate cure time is typically 24 hours. (Refer to the Essex drive away chart for the cure times as the temperatures and humidity vary). Inadequate or incorrect curing can adversely affect the retention of the back window glass.
^ Wipe off the Urethane Glass Prep Essex U-401 meeting Ford specification WSB-M2G314-B immediately after each application because it flash dries.
^ If the vehicle is to be driven within 24 hours of urethane adhesive application, Urethane Adhesive Essex U-216 meeting Ford specification WSB-M2G316-B must be used due to its one-hour cure time.