| Crankshaft and flywheel | Main bearing journal diameter | | 2.5190-2.5198 in. |
| Out-of-round limit | | 0.0003 in. |
| Taper limit | | 0.006 in @0.003 in per 1 in. |
| Journal runout limit | | 0.002 in. |
| Surface finish (RMS) | | 10.0 micro in. |
| Thrust bearing journal | Length | | 1.0148-1.067 inch |
| Connecting rod journal | Diameter | | 2.1253-2.1261 inch |
| Out-of-round limit | | 0.0003 inch MAX @ 0.0006 in Total |
| Taper limit | | 0.0003 in per inch |
| Surface limit (RMS) | | 0.25 micrometers |
| Main bearing thrust face | Surface finish (RMS) | | 0.4 micrometers |
| Runout limit | | 0.001 inch |
| Flywheel ring gear lateral turnout (T.I.R.) | Automatic transmission | | 0.07 inch |
| Crankshaft end play | | | 0.004-0.008 inch |