Front Door

REMOVAL
1. Remove the front door trim panel.
2. Position the watershield aside.







3. Disconnect the interior door handle cable guide.







4. Remove the window glass run channel bolt.







5. Remove the bolts and position the center window glass support aside.







6. Disconnect the exterior door handle actuating rod.
^ Open the locking clip.







7. Unclip the lock rod from the lock cylinder.







8. Remove the door latch bolts.
^ Disconnect the electrical connector(s).
9. Position the front door latch and cable assembly aside.







10. Remove the door ajar switch.
1 Lift the locking tab at the lower end.
2 Rotate the door ajar switch counterclockwise.
3 Remove the door ajar switch.

INSTALLATION
1. To install, reverse the removal procedure.