Test I: LFC 22 and 23/DTC B2295 - Side Air Bag Status

I1 - I2:

I3:

I4 - I5:

I6 - I7:

I8:

I9:

I10 - I11:

I12 - I13:

I14:

I15 - I16:

I17 - I18:

Normal Operation
The Restraints Control Module (RCM) checks all of the seat side air bag circuits for faults. If the RCM detects one of the following faults on any of the seat side air bag circuits, it will store Diagnostic Trouble Code (DTC) B2295 in memory and flash either Lamp Fault Code (LFC) 22 or 23 depending on the fault (or higher priority code if one exists) on the air bag indicator.

Fault Conditions
The RCM monitors for the following fault conditions:
^ Low resistance.
^ High resistance or circuit open.
^ Circuit short to voltage.
^ Circuit short to ground.

Possible Causes
A seat side air bag status fault can be caused by:
^ Wiring, terminals, or connectors.
^ A faulty seat side air bag module.
^ RCM is faulted.