Rear Bumper Cover / Fascia: Service and Repair

REAR BUMPER COVER

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.







2. Remove the rear bumper cover screws.







3. Remove the 2 pin-type retainers and the 2 screws (1 each side).







4. Remove the 6 pin-type retainers (3 each side).
5. Lower the vehicle.







6. Remove the pin-type retainers and the luggage compartment rear trim panel.
7. Position the luggage compartment lining material aside.







8. Remove the 4 rear bumper cover nuts (2 each side).







9. Remove the 6 nuts (3 each side) and the rear bumper cover.
10. To install, reverse the removal procedure.