Seat Armrest - Rear

SEAT ARMREST - REAR







Disassembly and Assembly

1. WARNING: If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to Fire Suppression System.

For police vehicles equipped with a fire suppression system, depower the system.

2. Remove the armrest.
3. Remove the rubber inserts from the armrest cup holder.
4. Remove the 2 screws from the armrest cup holder.
5. Remove the 2 pivot screws from the armrest.







6. Remove the hog rings.
7. Remove the armrest trim cover.
8. To assemble, reverse the disassembly procedure.
9. Install the armrest.

10. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire Suppression System.

For police vehicles equipped with a fire suppression system, repower the system.