Connecting Rod, Engine
Connecting RodRod-to-pin clearance 0.016-0.038 mm (0.0006-0.0015 inch)
Pin bore diameter 22.02-22.01 mm (0.8671-0.8666 inch)
Rod length (centerline bore-to-bore) 150.7 mm (5.9330 inch)
Maximum allowable bend ±0.038 mm (0.0015 inch)
Maximum allowable twist ±|0.05 mm (0.0019 inch)
Rod bearing bore diameter 56.86-56.89 mm (2.2388-2.2396 inch)
Rod bearing-to-crankshaft clearance 0.06-0.02 mm (0.0026-0.0010 inch)
Rod side clearance
Standard 0.015-0.45 mm (0.0006-0.0177 inch)
Maximum 0.50 mm (0.0197 inch)
Connecting rod cap bolts
Discard the connecting rod cap bolts.
First pass 43 Nm (32 ft. lbs.)
Final pass tighten 90-120°