Door Alignment - Rear

DOOR ALIGNMENT - REAR

1. Position the rear door primary weatherstrip seal aside.







2. Mark the position of the rear door hinge to use as a reference.







3. Loosen the 4 rear door hinge-to-door bolts just enough to permit movement.
4. Adjust the rear door seal on body weatherstrip seal gap to specification.







5. Tighten the 4 rear door hinge-to-door bolts.
- Tighten to 25 Nm (18 lb-ft).

6. Install the primary weatherstrip seal.
7. If necessary, adjust the door striker.