Seat Cushion Cover - Rear

SEAT CUSHION COVER - REAR

Removal and Installation
1. Remove the rear seat cushion.







2. Release the draw string and remove the hog rings.

3. CAUTION: Use care when separating the backrest trim cover from the hook and loop strip, or the hook and loop strip can be torn from the backrest foam pad.

Partially invert the trim cover and release the hook and loop strips up to the hog rings.







4. Remove the hog rings and continue to release the hook and loop strips and separate the trim cover from the foam pad.
5. To install, reverse the removal procedure.
6. Install the rear seat cushion.