Seat Bolster - Rear

SEAT BOLSTER - REAR







Removal and Installation
1. Access and remove the side bolster bolt between the rear seat cushion and affected side bolster.
- To install, tighten to 11 Nm (8 lb-ft).

2. CAUTION: Do not force the latch or side bolster to release. Applying excessive force can damage the latch.

NOTE: Make sure the side bolster latch is fully disengaged before removing the rear side bolster to avoid damaging the latch.

Fully release the latch and remove the side bolster.

3. To install, reverse the removal procedure.
- Make sure the safety belts and buckles are accessible to the occupants after installation.