Engine Controls - Tip-In Hesitation After Cold Start-Up
TSB 05-26-2012/31/05
COLD START TIP-IN HESITATION - 2.3L WITH
AUTOMATIC TRANSMISSION - VEHICLES BUILT
BEFORE 12/9/2005
FORD:
2006 Fusion
MERCURY:
2006 Milan
ISSUE
Some 2006 Fusion/Milan vehicles built before 12/9/2005, equipped with a 2.3L engine and automatic transmission, may exhibit a tip-in hesitation within the first 30 seconds after starting. The concern may occur when coolant temperatures are between 50 and 100°F (10 and 38°C).
ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using WDS release B40.7 and higher or B41.1 and higher. This new calibration is not included in the B41 CD. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION DESCRIPTION TIME
052620A 2006 Fusion/Milan: Check 0.4 Hr.
Diagnostic Trouble Codes
And Reprogram The
Powertrain Control Module
(Do Not Use With 12650D)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 04
Disclaimer