Instrument Panel Upper Section

INSTRUMENT PANEL UPPER SECTION

All Vehicles:

Removal and Installation
1. Remove the instrument panel center finish panel.

2. CAUTION:
- To avoid damaging the instrument panel, the aid of an assistant is required to carry out this step.
- To avoid damaging the instrument panel cross car beam or the instrument panel upper section, spread a suitable covering over the bench to place the instrument panel on.

NOTE: Place the instrument panel on the bench and support it upright so that the screws are accessible from the rear.

Remove the instrument panel.

3. Remove the steering wheel.

4. CAUTION:
- To avoid damaging the instrument panel pad, the aid of an assistant is required to carry out this step.
- Do not twist or bend the instrument panel pad when removing it from the vehicle.

Remove the instrument panel pad.
- Remove the 13 screws and remove the pad.

5. To install, reverse the removal procedure.