Auto-Dimming Interior Mirror

AUTO-DIMMING INTERIOR MIRROR







Removal
1. If equipped, position the electronic compass sensor aside.







2. Disconnect the auto-dimming interior mirror electrical connector.







3. Position the auto-dimming interior rear view mirror outboard (towards the driver door) to its full extension.







4. Rotate the auto-dimming interior mirror back until it is parallel with the windshield. The auto-dimming interior mirror mount is now locked between the 2 adjustment balls and joints.







5. NOTE: It takes approximately 10 pounds of force to remove the auto-dimming interior mirror from the windshield bracket.

Hold the auto-dimming interior mirror firmly in one hand and strike the auto-dimming interior mirror with the palm of an open hand.

Installation







1. Seat the auto-dimming interior mirror base partially on the mounting button.







2. Rotate the auto-dimming interior mirror fully up.







3. Slide the auto-dimming interior mirror base down on the mounting button until a click is heard.







4. Connect the auto-dimming interior mirror electrical connector.
5. If equipped, position the electronic compass sensor onto the interior mirror.