Headlamp Assembly

HEADLAMP ASSEMBLY







Removal
1. Remove the front bumper cover.
2. Remove the 4 bolts and the headlamp assembly.
- Disconnect the electrical connectors.

Installation
1. Connect the electrical connectors and position the headlamp assembly in place.
2. Install the side headlamp assembly bolt.
- Tighten to 7 Nm (62 lb-in).

3. Install the front headlamp assembly bolt.
4. Install the top outboard headlamp assembly bolt.
5. Install the top inboard headlamp assembly bolt.
6. Install the front bumper cover.