Rear Window Wiper Motor

REAR WINDOW WIPER MOTOR

Removal and Installation
1. Remove the rear wiper pivot arm.
2. Remove the liftgate trim panel.







3. Open the rear window wiper pivot arm nut cover.







4. Remove the rear window wiper pivot arm nut.
- To install, tighten to 18 Nm (13 lb-ft).







5. Remove the rear window wiper assembly.
- Disconnect the electrical connector.
- Remove the 3 bolts.
- To install, tighten to 10 Nm (89 lb-in).

6. To install, reverse the removal procedure.