Exterior Mirror Glass

EXTERIOR MIRROR GLASS







Exploded View

Removal
1. Position the exterior rear view mirror glass to its maximum travel in the DOWNWARD position.







2. Locate the 2 retaining clip locations at the top of the mirror glass.

3. WARNING: Place a shop towel between the exterior rear view mirror glass and the hand to avoid personal injury in the instance of glass breakage.

Disconnect the upper portion of the exterior rear view mirror glass from the exterior mirror motor.
- Insert a small flat-bladed screwdriver between the exterior rear view mirror glass and the exterior mirror motor at the retaining locations.
- Twist the small flat-bladed screwdriver to release the retainers.







4. If equipped, disconnect the heated mirror electrical connectors.







5. Rotate the exterior rear view mirror glass downward to release the retaining hooks at the bottom of the mirror glass.
6. Remove the exterior rear view mirror glass.

Installation
1. Insert the retaining hooks at the bottom of the exterior rear view mirror glass into the inserts located on the exterior mirror motor.
2. Rotate the exterior rear view mirror glass UPWARD.
3. If equipped, connect the heated mirror electrical connectors.

4. NOTE: An audible click will be heard during installation.

Press firmly at the center top the exterior rear view mirror glass until it snaps onto the exterior mirror motor.