Seat Bolster - Rear

SEAT BOLSTER-REAR, FIVE HUNDRED, MONTEGO







Removal and Installation

NOTE: LH side shown, RH side similar.

All bolsters
1. Remove the rear seat cushion.

Bolsters having been previously removed
2. Remove the nut from the lower retainer stud.

All bolsters
3. Separate the LH rear door weatherstrip at the seat backrest side bolster.
4. Between the pinch weld and the LH scuff plate, pry out and release the side bolster lower retainer.
5. Slide the LH side bolster up and out to remove.

All bolsters
6. To install, reverse the removal procedure.
- When installing the side bolster, install a M6 x 1.0 nut on the lower retainer stud and tighten to 8 Nm (71 lb-in).