Air Cleaner Housing: Service and Repair
AIR CLEANERExploded View
Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the mass airflow (MAF) sensor electrical connector.
3. Loosen the clamp and disconnect the air cleaner outlet pipe from the air cleaner housing.
- To install, tighten to 5 Nm (44 lb-in).
4. Remove the air cleaner housing bolt.
- To install, tighten to 5 Nm (44 lb-in).
5. Remove the air cleaner housing.
- Detach the air cleaner housing pins from the rubber grommets.
6. To install, reverse the removal procedure.