Alarm System Transmitter: Service and Repair

Anti-Theft - Passive Anti-Theft System (PATS) - Transceiver

Passive Anti-Theft System (PATS) Transceiver

NOTE: MKZ shown, Fusion and Milan similar.










Removal and Installation

1. Remove the 3 screws and the lower steering column shroud.

2. Position the upper steering column shroud aside.

3. Disconnect the electrical connector and remove the Passive Anti-Theft System (PATS) transceiver.

4. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.

To install, reverse the removal procedure.