Bumper - Front

Bumper - Front









Removal and Installation

1. Remove the front bumper cover. For additional information, refer to Bumper Cover - Front Removal and Replacement.

2. Remove the front bumper isolator from the front bumper.
- Pull the isolator rearward while releasing the retainers.

3. Remove the 6 front bumper bolts (3 each side).
- To install, tighten to 25 Nm (18 lb-ft).

4. Remove the 4 front bumper bolts (2 each side) from the radiator support.

5. Remove the 2 front bumper stud nuts.
- To install, tighten to 25 Nm (18 lb-ft).

6. Remove the front bumper.

7. To install, reverse the removal procedure.