Marker Lamp: Service and Repair

Side Marker Lamp

All Vehicles

NOTE: LH shown, RH similar.











Fusion, Milan










MKZ









Removal and Installation

All vehicles

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the screw and the fender splash shield access cover.

Fusion, Milan

3. Release the tabs and remove the side marker lamp.
- Disconnect the electrical connector.





MKZ

4. NOTE: Rotate the bulb holder approximately one-eighth turn counterclockwise to remove.

Disconnect the electrical connector and remove the marker lamp from the headlamp assembly.

All vehicles

5. To install, reverse the removal procedure.