Operation CHARM: Car repair manuals for everyone.

System Specifications

Timing Chain Tensioner

Install the RH timing chain tensioner and tensioner arm.
1. Install the tensioner arm.
2. Position the tensioner.
3. Install the 2 bolts.
4. Tighten to 25 Nm (18 lb-ft).

Install the LH timing chain tensioner arm and the LH timing chain tensioner.
1. Install the tensioner arm.
2. Position the tensioner.
3. Install the 2 bolts.
- Tighten to 25 Nm (18 lb-ft).

Crankshaft Pulley

Install the bolt and washer. Using the Strap Wrench to hold the crankshaft pulley, tighten the bolt in 4 stages:
Stage 1: Tighten to 120 Nm (89 lb-ft).
Stage 2: Loosen one full turn.
Stage 3: Tighten to 50 Nm (37 lb-ft).
Stage 4: Tighten an additional 90 degrees.

Timing Cover

Position the engine front cover and install the 14 bolts and the 2 stud bolts.
Tighten in the sequence shown to 25 Nm (18 lb-ft).