150000 MI or 240000 KM

Inspect
    Vehicle
      Recommended Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate driveshaft and u-joints, (lubricate if equipped with Zerk fittings).
    Tie Rod End
      Inspect and lubricate, (lubricate if equipped with Zerk fittings).
    Steering and Suspension
      Inspect and lubricate steering linkage and suspension, (lubricate if equipped with Zerk fittings).
    Positive Crankcase Ventilation Valve
      Inspect PCV valve for flow (3V engines)
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Every 15,000 miles (24,000 km), 600 hours of engine operation or as indicated by the instrument cluster message center
    Constant Velocity Joint Boot
      If equipped.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system.
    Ball Joint
      Inspect and lubricate, (lubricate if equipped with Zerk fittings).
Replace
    Oil Filter, Engine
    Fluid Filter - A/T
      Replace automatic transmission fluid filter (except 6F50, AWF-21, FNR5 and TorqShift transmissions.)
    Fluid - A/T
      Replace automatic transmission/transaxle fluid (except TorqShift transmission).
    Filters
      Climate-controlled seat filter
    Engine Oil
    Drive Belt
      If not replaced in the last 100,000 miles.
    Coolant
      Change Motorcraft Premuim Gold Engine Coolant.
    Cabin Air Filter / Purifier
      Replace if equipped.
    Air Filter Element
      Replace engine air filter (except Focus with PZEV engine).
Rotate
    Tires
      Rotate tires, inspect for wear, measure tread depth and inspect wheel ends for end play and noise. Vehicles with dual rear wheels should only rotate if unusual wear is noted. For vehicles with different front-to-rear tire pressures, the tire pressure must be adjusted and the tire pressure sensor training must be done.