Overhaul

Cylinder Head

Disassembly

NOTICE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components removed for locations. If not reassembled in their original positions, severe engine damage may occur.

1. Using the Valve Spring Compressors, remove the keys, retainer and spring.

2. Remove the valve from the cylinder head.

3. Remove the valve stem seal.

Assembly

1. Using the Valve Stem Oil Seal Installer, install the valve stem seal.

2. Install the valve.

3. Using the Valve Spring Compressors, install the valve spring, retainer and keys.