Selector Lever Cable Adjustment - Aisin AW21

Selector Lever Cable Adjustment - Aisin AW21

1. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Fuel Delivery and Air Induction.

2. Disconnect the selector lever cable end from the manual control lever.





3. Place the selector lever in DRIVE.





4. Place the manual control lever in DRIVE.

1. Place the manual control lever in PARK.

2. Move the manual control lever counterclockwise 3 detents to the DRIVE position.





5. Release the selector lever cable adjuster lock.

1. Pull out on the adjuster lock tabs.

2. Slide the lock up to unlock the selector lever cable.





6. Align the selector lever cable end to the manual control lever ball stud and install it with the adjuster unlocked.





7. Slide the adjuster tab in place to lock the selector lever cable.





8. Install the ACL assembly. For additional information, refer to Fuel Delivery and Air Induction.

9. Verify that the vehicle starts in PARK and NEUTRAL only and that the reverse lamps illuminate in REVERSE.