Headlamp: Service and Repair

Headlamp Assembly

Crown Victoria









Grand Marquis









Removal and Installation

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

Crown Victoria

1. Remove the 3 pin-type retainers and the radiator sight shield.





2. Remove the 2 retainers and the headlamp assembly.
- Disconnect the electrical connectors.

Grand Marquis

3. Remove the side turn signal lamp. For additional information, refer to Side Turn Signal Lamp Side Turn Signal Lamp.

4. Remove the 3 bolts and the headlamp assembly.
- Disconnect the electrical connector.

- To install, tighten to 5 Nm (44 lb-in).

All vehicles

5. To install, reverse the removal procedure.
- If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment Headlamp Adjustment.