Side Turn Signal Lamp

Side Turn Signal Lamp

Crown Victoria









Grand Marquis









Removal and Installation

All vehicles

1. Remove the 3 pin-type retainers and the radiator sight shield.





Crown Victoria

2. Remove the side turn signal lamp screw.

3. Remove the nut and the side turn signal assembly.
- Disconnect the electrical connector.

- To install, tighten to 5 Nm (44 lb-in).

Grand Marquis

4. Remove the 2 nuts and the side turn signal assembly.
- Disconnect the electrical connector.

- To install, tighten to 5 Nm (44 lb-in).

All vehicles

5. To install, reverse the removal procedure.