Suction Accumulator To Evaporator Line

Suction Accumulator To Evaporator Line













Removal and Installation

1. Recover the refrigerant. For additional information, refer to Climate Control System - General Information and Diagnostics Air Conditioning (A/C) System Recovery, Evacuation and Charging.

2. Disconnect the suction accumulator inlet fitting.
- Discard the O-ring seals.

3. Disconnect the evaporator core outlet fitting.
- Discard the O-ring seals.

4. Remove the suction accumulator-to-evaporator line.

5. To install, reverse the removal procedure.
- Install new O-ring seals.

- Lubricate the refrigerant system with the correct amount of clean PAG oil. For additional information, refer to Climate Control System - General Information and Diagnostics Refrigerant Oil Adding.

6. Evacuate, leak test and charge the refrigerant system. For additional information, refer to Climate Control System - General Information and Diagnostics Air Conditioning (A/C) System Recovery, Evacuation and Charging.