Coolant Pump

Coolant Pump - 3.0L (4V)









Removal and Installation

1. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Service and Repair.

2. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Intake Air Distribution and Filtering - 3.0L (4V) Air Cleaner Outlet Pipe.

3. Disconnect the lower radiator hose from the thermostat housing.

4. Remove the coolant pump belt. For additional information, refer to Accessory Drive - 3.0L (4V) Accessory Drive Belt.

5. Remove the 3 bolts and the coolant pump.
- Remove and discard the gasket.

- To install, tighten to 10 Nm (89 lb-in).

6. To install, reverse the removal procedure.
- Install a new gasket.

7. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding Service and Repair.