Accessory Drive Belt

Accessory Drive Belt

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the 4 screws and position the RH fender splash shield aside.





3. Remove the 6 pin-type retainers and the RH splash shield.





4. Remove the A/C hose retainer bracket bolt.
- To install, tighten to 6 Nm (53 lb-in).





5. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.

6. To install, reverse the removal procedure.