150000 MI or 240000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness, or drag.
    Vehicle
      Perform multi-point inspection (recommended) if not using Special Operating conditions.
    Steering and Suspension
      Inspect half-shaft boots (if equipped). Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft, and U-joints; lubricate if equipped with grease fittings if not using Special Operating conditions.
    Cooling System
      Inspect engine cooling system and motor/electronics cooling system for strength and hoses if not using Special Operating conditions.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake if not using Special Operating conditions.
Replace
    Oil Filter, Engine
      Change engine oil and replace oil filter if using Special Operating conditions I, D.
    Fluid Filter - A/T
      Change automatic transmission fluid filter (except for 6F35, 6F50, AWF-21, FNR5 and TorqShift transmissions). If not using Special Operating Conditions.
    Fluid - M/T
      Change manual transmission fluid if not using Special Operating condition. Change manual transmission fluid if using Special Operating condition D.
    Fluid - A/T
      Change automatic transmission fluid (except for 6F35, 6F50, AWF-21, FNR5 and TorqShift transmissions). If not using special operating conditions. Change automatic transmission fluid if using Special Operating conditions I, D.
    Filters
      Climate-controlled seat filter
    Engine Oil
      If using Special Operating conditions I, D.
    Drive Belt
      Replace drive belt(s) if not replaced within the last 100,000 miles (160,000 km).
    Coolant
      Change engine and motor/electrical cool system coolant.
    Cabin Air Filter / Purifier
      Replace cabin air filter as required (if equipped) if using Special Operating Conditions I, D and O if applicable.
    Air Filter Element
      Inspect frequently, replace engine air filter as required if using Special Operating conditions I, D.
Rotate
    Tires
      Rotate tires, inspect tires for wear and measure tread depth if using Special Operating condition D.