Transaxle Filler Tube

Transaxle Filler Tube









Removal

All vehicles

1. Remove the transaxle vent hose from the transaxle filler tube.





Vehicles equipped with a 3.0L engine

2. Disconnect the wiring harness retainer from the transmission fluid filler tube.





All vehicles

3. Remove the transaxle filler tube nut.
- To install, tighten to 11 Nm (97 lb-in).





4. Pull and rotate the transaxle filler tube clockwise and remove the transaxle filler tube.





Installation

1. Inspect the O-ring seal on the transaxle filler tube for damage and install a new O-ring if needed. Lubricate the O-ring seal with clean automatic transmission fluid.





2. To install, reverse the removal procedure.