Steering and Suspension: Service and Repair

Instructions For Removing and Installing 1-Lug Clips
Special Tools Required:
^ 32 1 260

Note:
The work steps are show on assorted components.
1-lug clip must always be replaced.





To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.





The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.





Attach hook fastener and press ear together with special tool 321 260.





Side cutter of special tool 32 1 260 can be used in areas which are difficult to access.





Caution: Gap (A) max. 1 mm!