A/C - Will Not Blow Cold Air
SI M 64 02 04Heating and Air Conditioning
June 2005
Technical Service
This Service Information bulletin supersedes S.I. M64 02 04 dated August 2004.
[NEW] designates changes to this revision
SUBJECT
A/C Does Not Blow Cold Air
MODEL
[NEW] R50 (Cooper) with CVT (Automatic Transmission)
Vehicles produced up to August 18, 2004
SITUATION
The A/C line from the condenser to the evaporator is cut by a sharp edge on the CVT oil pan.
CORRECTION
1. [NEW] If the vehicle was produced prior to August 18, 2004 proceed to the next step. For vehicles afier the above mentioned production date, before disturbing the routing of the cut hose, take digital pictures from the angles as shown and attach them to a PuMA case.
2. Replace the hose and reposition it so that it does not rub on the oil pan. Refer to Repair Instruction RA64 50 009 (Drawing off evacuating and filling A/C system - R134a).
Disclaimer