Exterior Lights

Exterior lights

Function
The exterior lights, the headlight adjustment and the fog lamps are controlled via the central body electrical system; the reversing lights are controlled directly via the switch for reversing lights.

Headlights
To switch on the parking lights, the main light switch must be set to position 1.

To switch on the low beam, the main light switch must be set to position 2/low beam and the ignition switch to position 2.

To operate the headlight flasher, the low beam/high beam switch and/or headlight flasher lever must be pulled towards the driver and the ignition key must be in position 1 or 2.

To switch on the high beam, the low beam/high beam switch must be pulled toward the driver until it reaches its end position. The ignition key must be in position 2 and the main light switch in position 2. The high beam is deactivated by pulling the low beam/high beam switch a second time towards the driver. Turning the ignition key either to position 0 or 1 also switches off the high beam.

To switch on the additional headlights (if mounted), the headlight flasher must be operated as described above.

To switch on the fog lamps, the main light switch must be set to either position 1 or position 2 / low beam. The ignition switch must be in position 2 and the switch for the fog lamps must be pressed. The fog lamps can be switched off by again pressing the appropriate switch or by turning the ignition switch to 0 or 1.

Tail Lights
To switch on the tail lights and the license plate light, the main light switch must be set to either position 1 or position 2. The ignition key can be in any switch position.

The brake lights are activated when the brake pedal is pressed and the ignition key is in position 1 or 2.

To switch on the rear fog lamps, the main light switch must be set to position 2/low beam and the ignition switch to position 2. Then the rear fog lamps switch must be pressed. To switch off the rear fog lamps, the rear fog lamp switch must be pressed again or the ignition key moved to position 0 or 1. Alternatively, the main light switch can be moved to position 1 or 0/OFF.

European Daytime-Driving Light
This option can be programmed.

When the ignition switch is in position 2 and the main light switch is in position 0/OFF, the low beam, parking light, rear and license plate lights are switched on.

Canadian Daytime-Driving Light
This option can be programmed.

When the ignition switch is in position 2 and the main light switch is in position 0/OFF, the headlights are switched on with reduced power. When the parking brake is operated or the selector lever setting PARK is selected, the daytime-driving light is switched off.

Low Beam With Wiper
This option can be programmed.

When the ignition switch is in position 2 and the main light switch is switched off, the low beam and parking light can be switched on by operating the wiper.

Warning Lamps And Turn Indicators
To switch on the turn indicators, the ignition switch must be in position 1 or 2 before the turn indicator stalk is operated.

Home Lighting (Automatic Headlight Deactivation)
This option can be programmed.

To activate the automatic headlight deactivation, the initial state is that the ignition switch is in position 2 and the main light switch is in position 2. Then, switching off the lights after switching off the ignition activates the timer function (if this is done in reverse order, the light switches off as normal). The low beam remains on for approx. 30 seconds and then switches off automatically.

Headlight Adjustment
The headlights can be adjusted vertically by turning headlight setting wheel. The ignition switch must be in position 2 and the main light switch at either position 1 or 2 / low beam.

On vehicles with gas discharge headlights, the headlight adjustment is performed using a separate control module.

Inputs and outputs
The inputs and outputs of the central body electrical system for the exterior light functions are listed below:
Inputs
Ignition switch
Main light switch
Front fog lamp switch
Rear fog lamp switch
Headlight adjustment wheel
Brake light switch
High beam/low beam selector*
Turn indicator stalk*
Hazard warning light switch*
Crash sensor
Car locking status
Alarm status
Switch for reversing lights
Parking brake contact
Driving speed signal
Park switch
* These switches are integrated in the main light switch in the steering column.

Outputs
Driving light
Additional headlights
Tail lights
Headlight adjustment device
Fog lamps
Rear fog lamps
Raised brake light
Brake lights
Left turn indicator
Right turn indicator
Lights ON information
Light failure information
Reversing lights
License plate light