Trunk / Liftgate: Adjustments

41 62 014 Adjusting Rear Lid To Fit

Note: R50 gap dimensions serve as basis for adjustment tasks.

Make unpainted surfaces visible by also moving the hinges. Touch these up in the appropriate colour.
Do not damage adjoining body parts.







Adjustment points for adjusting rear lid to fit.







Slacken screws on hinge (see arrow).
Adjust rear lid to fit according to specified gap dimension.
If adjustment range is not enough, also slacken screws (1). Only accessible from interior.
Tighten screws after adjustment.
Following adjustment, seal all areas with cavity sealant.
If necessary, adjust rear lid lock.