Brake Lamp: Service and Repair

Brake/Tail Lights


The tail lamp assemblies are secured to the body by two clips on the outer side and stud and nut on the inner side of the tail lamp assembly. Replacement of the tail lamp bulbs is possible through access provided in the rear quarter trim panels. Removal of the tail lamps is achieved by releasing the clips and removal of the nut through the same access panels.

Third Brake Light
The third brake light is secured to the tailgate by three Torx screws. These screws are accessible with the tailgate open which reveals the screws. The third brake light is an LED type and is serviced as a complete unit only.