Section 32

32 1 190 Removal tool





Minimum set: Mechanical tools

Note: For removing tapered seats of track rod ball joints

Series:E38, E39, R50, R53
Storage location:B22
Order number:32 1 190 Removal tool



32 1 260 Pliers





Note: For opening and fastening hose clamps

Series:All models
SI number:10201(667)
Order number:32 1 260 Pliers



32 1 270 Plugs (set)





Minimum set: Mechanical tools

Note: 27-piece, 3 x per size - For sealing off hydraulic lines for brakes, steering etc.

Series:All models
SI number:1 1401(766)
Order number:32 1 270 Plugs (set)



32 3 050 Assembly sleeves





Note: For mounting snap rings on steering spindle

Series:E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, R50, R53
Storage location:A18, A19
Order number:32 3 050 Assembly sleeves
Consisting of:
1 = 32 3 051 Drift
2 = 32 3 052 Slip bush

Note: For mounting snap ring in conjunction with flat nut for securing steering wheel - Model year: up to 73

3 = 32 3 053 Slip bush

Note: For mounting snap ring on bottom steering spindle bearing - Model: 2500 ... 3.0 CSi

4 = 32 3 054 Slip bush

Note: For mounting snap ring in conjunction with stop nut for securing steering wheel - Model year: as of 74



32 3 090 Press-off tool





Minimum set: Mechanical tools

Note: For pressing wheel guide joint off wheel carrier E30 (325ix), E34 (525ix), E36, E46, Z1, Z3. For pressing tie rod off wheel carrier E34 (525ix)

Series:E30, E34, E36, E36/7, E46, R50, R53
Storage location:B21
Order number:32 3 090 Press-off tool
Consisting of:
1= 32 3 091 Thrust pin



32 4 110 Adapter

Note: For measuring height of front axle.

Series:R50, R53
SI number:10501(718)
Order number:32 4 110 Adapter



32 4 200 Setting tool





In conjunction with: KDS

Note: For adjusting wheel toe on rear axle (similar to 32 3 080)

Series:R50, R53
Order number:32 4 200 Setting tool



32 4 210 Fixture





Note: For checking ride level

Series:R50, R53
Order number:32 4 210 Fixture