51 45 050 Removing And Installing Instrument Panel Top Section Trim (Up To 04/07)

51 45 050 Removing And Installing Instrument Panel Top Section Trim (Up To 04/07)







Lever out cover on left/right in direction of arrow and remove towards rear.







Important: Pull off carefully (risk of damage).

Release screws (1) on left/right.
Remove panelling.

Installation: Instrument panel top section trim must be correctly aligned during fitting.







Installation: Following parts of instrument panel top section trim (5) must not be damaged or missing:
1 Foam pads
2 Felt strip along front edge (grinding noise)
3 Trim, middle
4 Trim, left/right