Front Axle

31 21 180 - Replacing bearings (wheel hub) for front wheel





Release collar nut (1), press brake pedal to floor for this purpose.

Installation:
Replace collar nut.
Tightening torque, 31 60 2AZ [1][2]Differential Assembly.

Important!
Secure collar nut after tightening down on flattened area of drive shaft by peening.





Necessary preliminary tasks:
- Remove brake disk Removing and Installing/Replacing Both Front Brake Discs
- Remove wheel speed sensor Replacing One Front Pulse Generator





Release screws (1) and remove bearings for front wheel.

Installation:
Tightening torque 31 21 2AZ Front Axle.





Important!
Secure collar nut after tightening down on flattened area of drive shaft by peening.