Fuel Pump: Service and Repair

16 14 015 - Removing and installing/replacing fuel pump with fuel level sensor





Special tools required:
- 16 1 020





Necessary preliminary tasks:
- Draw off fuel from fuel tank Service and Repair
- Remove rear seat





Push trim panel (1) forward.
Unscrew nuts (2).
Tightening torque, 16 11 2AZ .
Remove cover (3).





Disconnect plug connection.





Release screw cap with special tool 16 1 020 .

Installation:
Replace rubber seal.
Tightening torque, 16 14 1AZ .





Raise unit.
Remove locking clip of line connection.
Detach lines (1) and plug (2) from sensor unit.
Carefully lift sensor unit out of tank.
Catch dripping fuel in a suitable container.





Installation:
When installing fuel level sensor, make sure lug (1) engages in recess (2) on tank.