Removal and Replacement

36 12 084 - Replacing sealant bottle of M-Mobility system

Note:
This work step describes how the sealant bottle is replaced within the framework of inspection (M-Mobility system not used).
If the M-Mobility system has been used, also replace the transparent tire inflation hose.





Remove seal film (1). Not necessary if M-Mobility system has already been used.

Installation:
Replace seal film.





Release Torx threaded bolts (1) and raise cover as far as possible.

Installation:
Tightening torque, 36 12 1AZ [1][2]Specifications.





Release hexagon nut (1), grip nut firmly from underside.

Installation:
Tightening torque, 36 12 2AZ [1][2]Specifications.





Lift sealant bottle out.





Ensure that hose is laid without any kinks.





Note:
Note the expiration date when installing a new sealant bottle.