Removing and Installing Engine

11 00 050 Removing and installing engine with transmission (N12)

Special tools required:





Necessary preliminary tasks:
^ Lift engine hood into assembly position.
^ Remove exhaust system.
^ Drain engine oil.
^ Disconnect negative battery lead.
^ Remove both drive shafts.
^ Remove air cleaner housing.
^ Remove fan cowl with electric fan.
^ Detach all coolant hoses from engine.
^ Detach vacuum line from brake booster.
^ Release engine wiring harness from electronics box and lay to one side.
^ Remove complete front panel





Attach special tool 11 0 260 to lifting eye (1) at engine end





Attach special tool 11 0 260 to lifting eye (1) at transmission end

Release transmission and engine mounts.

Remove engine with special tool 11 0 260 towards front.








Assemble engine.

Check function of DME.