Procedures

11 12 719 Resurfacing cylinder head sealing face (N14)

Necessary preliminary tasks:
^ Remove cylinder head.
^ Remove exhaust camshaft.
^ Remove inlet camshaft.

Check evenness of cylinder head sealing face with a standard straight-edge (1).

Note:
Max. deviation from level (longitudinal) 0.10 mm
Illustration shows N52.





Check evenness of cylinder head sealing face with a standard straight-edge (1).

Note:
Max. deviation from level (transversal) 0.05 mm
Illustration shows N52.





Check cylinder head for water leaks.