Flywheel: Service and Repair

11 22 500 - Removing and installing or replacing flywheel (N14)





Special tools required:





Necessary preliminary tasks:
- Remove transmission 23 00 027 Removing and Installing Gearbox (GS6-53BG/DG).
- Remove clutch. (M/T only)





Lock flywheel with special tool 11 9 590.





Flywheel for automatic transmission.
Release flywheel bolts (1).
Tightening torque: 11 22 1AZ. [1][2][3]11 22 Flywheel

Installation:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.
Clean crankshaft thread for flywheel screws.





Flywheel for manual gearbox.
Flywheel with and without dual-mass: release flywheel bolts (1).
Tightening torque: 11 22 2AZ. [1][2][3]11 22 Flywheel

Installation:
Flywheel is secured with a dowel pin.
Replace flywheel bolts (1).
Clean crankshaft thread for flywheel screws.





Installation:
Sensor gear (1) is loose on crankshaft and is first secured to flywheel.
Dowel pin (2) for securing sensor gear/flywheel.





Assemble engine.