65 20 022 Replacing Roof-Mounted Aerial/Antenna

65 20 022 Removing And Installing/Replacing Roof-Mounted Aerial/Antenna

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).

Necessary preliminary tasks:
- Lower roofliner







Disconnect plug connection (1).







Disconnect plug connection (1).
Release retainer (2) and feed out roof antenna with leads towards top.

Tightening torque
1AZ Retainer to roof antenna
M13 x 1.0 5.0 Nm
Type: R55, R56

NOTE: Roof antenna shown removed for purposes of clarity.

Installation:







Ensure correct cable routing.
Feed antenna leads (1) through groove (2).
Tab (3) when installed secures antenna leads.

Installation:







Make sure guide (1) is correctly seated in roof opening (2).
Seal (3) must not be damaged.
Align roof antenna to car longitudinal axis.