Sunroof / Moonroof: Service and Repair
54 13 085 Removing And Installing/Replacing Complete Panorama Glass Roof
Special tools required:
Necessary preliminary work:
- Remove gas generator on left and right (without folding pack)
Unfasten plug connection (1) and disconnect.
Detach front water drain hoses.
Installation note:
Make sure water drain hoses are correctly seated.
Water ingress into passenger compartment is possible if water drain hoses are not correctly fitted.
Detach rear water drain hoses.
Installation note:
Make sure water drain hoses are correctly seated.
Water ingress into passenger compartment is possible if water drain hoses are not correctly fitted.
IMPORTANT: Two persons are required to help in removing the panorama glass roof.
Overview of panorama glass roof:
- Release screws (1).
- Tightening torque 54 12 05AZ.
- An assistant must secure the panorama glass roof to prevent it falling.
IMPORTANT: Do not damage any surrounding components when removing the panorama glass roof.
- Unfasten screws (2).
- Carefully lower the panorama glass roof and remove from vehicle towards rear through tailgate opening.
Replacement:
- Carry out vehicle programming/encoding
Installation note:
If necessary, remove fabric adhesive tape.
To stop creaking noises, secure all screws (1) prior to installation with plastic washers (2).
If the standard screws can no longer grip, use "repair screws" (larger threads).
Installing glass slide/tilt sunroof:
Installation note:
To align the panorama glass roof to the body aperture, insert screws and tighten loosely.
The panorama glass roof must still be able to move in the body aperture.
On account of leaks, the panorama glass roof must be exactly aligned to body aperture.
Insert special tool 54 1 120 into the centring bores in panorama glass roof and body fully.
Panorama glass roof glides into place.
Tighten down screws.
Tightening torque 54 12 05AZ.
IMPORTANT:
- Do not crush any cables when installing the panorama glass roof.
- Initialise the panorama glass roof.
