Service Indications

INFORMATION
The service indicators are displayed in two possible locations inside the vehicle:

1. Tachometer
The Tachometer CBS display uses two separate displays:








(1) - Colored symbol in center upper display (Orange for normal, Yellow for service due, Red for service overdue)
(2) - Remaining distance display in center lower display
(3) - Next Service Due date information in center lower display

2. Central Information Display (CID)
For vehicles with the optional navigation system, the CID can also display all information on the individual service operations. The CBS functions are stored in the "Settings" menu item and can be used exclusively for individual user settings.

PROCEDURE TO VIEW OR RESET SERVICE ITEMS USING THE TRIP RESET BUTTON

1. Sit in car, close door and turn ignition on (KL15).
2. Press and hold the Trip Reset button located on the Tachometer for 10 seconds.
3. The upper display in the Tachometer will be illuminated with a Service Item (example: An oil can is the designation for Oil Service). The lower display in the Tachometer will indicate the remaining time or mileage left for that Service Item (example: 14000). Pressing the BC (Board Computer) button repeatedly on the end of the turn signal stalk repeatedly will allow the display to scroll through all of the Condition Based Service items.
4. To reset, press and hold the BC button again and the lower display screen will indicate "RESET".
5. Pressing the BC button again will reset the service displayed in the upper window only. Repeat the procedure for any additional service reset needs.

Note: The CBS service items for both State Vehicle Safety Inspection and State Emissions Inspection cannot be viewed in the Instrument Cluster. These State Inspections can be viewed on the CBS Menu in the Control Display or by DISplus / GT1.