Replacing drive belt (without A/C system)

11 28 012 - Replacing drive belt (without A/C system)





Special tools required:
- 11 9 680 11 9 680 Fitting Aid





Necessary preliminary tasks:
- Remove right wheel arch line.





Cut through ribbed V-belt with a suitable tool (2).





Position special tool 11 9 680 on vibration damper (see arrow).





Attach special tool 11 9 680 in direction of arrow and slide further in direction of arrow.





Move special tool 11 9 680 on vibration damper into assembly position.





Place ribbed V-belt (1) on alternator (2).





Place ribbed V-belt (1) in direction of arrow on vibration damper.

Note:
See illustration.





Turn vibration damper in direction of arrow.
Press ribbed V-belt (1) inwards by hand (see arrow).

Important!
Danger of injury!





Turn vibration damper until drive belt on alternator and on vibration damper has fully jumped.
Remove special tool 11 9 680 from vibration damper.
Check correct seating of drive belt.





Add final details to vehicle.