41 61 000 Removing and Installing Hood/Bonnet

41 61 000 Removing and installing hood/bonnet







Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD CD (FR number 41 61 000).

Necessary preliminary tasks:
- Disconnect all cable plug connections







Slacken screws (1)
Unfasten screws (2).
Tightening torque 41 61 1AZ.
Remove engine hood/bonnet with assistance of a second person.

Installation:
Install engine hood at screw locations to on hinge. This dispenses with the need for adjustment after installation.
If this is not possible, adjust engine hood.